Skip to main content
Search Button
Danmark Kobo butik Gavekort Hjælp

Kobo Rakuten

Ønskeliste

Indkøbskurv

Du får VIP-behandling!

Vare(r) ikke tilgængelig til køb
Gennemgå din indkøbskurv. Du kan fjerne de(n) tilgængelige vare(r) nu, ellers fjerner vi det automatisk ved kassen.
varervare
varervare

Anbefalet til dig

Loading...

Maskineri e-bøger

Hvis du kan lide Maskineri e-bøger, så vil du elske disse fremragende valg.
Viser 1 - 24 af 1094 resultater
Skip side bar filters

  • The Cautious Traveller's Guide to The Wastelands

    THE INSTANT SUNDAY TIMES BESTSELLER

    af Sarah Brooks ...
    The breathtaking historical fantasy set onboard the Great Trans-Siberian Express**'**Imagine a crossover between Murder on the Orient Express, Game of Thrones and Paradise Lost . . . Brooks has serious talent' SUNDAY TIMES'I was completely transported by this book . . . I urge everybody to pick up a copy' STUART TURTON'Breathtaking . . .... ... Læs mere

    110,89 kr.

  • Rock Crushers Inventions

    af S.I. Fishgal ...
       In 1979, S.I. Fishgal made his rock crusher inventions for, but did not assign to Joy Manufacturing Co. (Pittsburgh, PA). The crushers were transmission, fluid-driven and impact ones as follows:    Double-Acting Single and Dual Eccentric    Cam Cone and Jaw    Arcuated-Jaw    Double Fed Twin-Jaw    Coil Cone    Toothed Gyratory    Horizontally Fed Singl... ... Læs mere

    125,34 kr.

  • Power System Transient Stability Analysis Using the Transient Energy Function Method

    af Abdel-Azia Fouad, Vijay Vittal ...
    This book details the state of the art in the development and application of the transient energy function (TEF) method as a tool for power system transient stability assessment. It provides both the analytical foundations of the TEF method and the practical issues involved in the application of the method to analyze power systems. Of primary interest to electric utility engineers who need to ... Læs mere

    709,11 kr.

  • Here Some Rust There Some Rust Everywhere Some Rust Rust

    af Randall M. Rueff ...
    Here Some Rust There Some Rust Everywhere Some Rust Rust Created by Randall M. Rueff - K9RMR 7-11-2020 A.D. ... Læs mere

    22,05 kr.

  • Control of DC Motor Using Different Control Strategies

    af Dr. Hidaia Mahmood Alassouli ...
    The ultimate goal of this paper is to control the angular speed, in a model of a DC motor driving an inertial load has the angular speed as the output and applied voltage as the input, by varying the applied voltage using different control strategies for comparison purpose. The comparison is made between the proportional controller, integral controller, proportional and integral controller, phase ... Læs mere

    62,99 kr.

  • Optimal and Suboptimal Control of SMES Devices for Power System Stability Enhancement

    af Dr. Hidaia Mahmoud Alassouli ...
    This is my master thesis "Optimal and Suboptimal control of SMES Devices for Power System Stability Enhancement." It includes the fallowing chapters: 1) Chapter 1:Introduction 2) Chapter 2:System Modeling 3) Chapter 3:Control Design 4) Chapter 4:SMES Control for Single Machine Infinite Bus System 5) Chapter 5: Application to Multi-Machine System 6) Main Fortran Program of M. Sc. Thesis “Optimal ... Læs mere

    95,49 kr.

  • APPRENEZ A FABRIQUER DU PAPIER

    af RW SINDALL ...
    Ce livre vous initie dans la fabrication du papier.Vous apprendrez:- LA PREMIERE MACHINE A PAPIER FOURDRINIER.- CELLULOSE ET FIBRES PAPIER- DERIVES DE CELLULOSE.- FIBRES POUR LA FABRICATION DU PAPIER.- LA FABRICATION DE PAPIER À PARTIR DE CHIFFONS- BLANCHIMENT ELECTROLYTIQUE.- CARACTERISTIQUES MICROSCOPIQUES DES FIBRES DE COTON ET DE LIN.- REACTIF POUR COLORER LES FIBRES.- COLORATION PRODUITE.- ... Læs mere

    163,74 kr.

  • Lasers In 3d Printing And Manufacturing

    af Chee Kai Chua, Murukeshan Vadakke Matham, Young-jin Kim ...
    Serier Bog 2 - World Scientific Series In 3d Printing
    Additive Manufacturing (AM), popularly known as 3D printing, is playing an increasingly significant role in the manufacturing arena. AM has revolutionized how prototypes are to be made and small batch manufacturing should be carried out. Due to high flexibility and high efficiency of lasers, laser-assisted Manufacturing (LAM) and AM technologies are recently getting much attention over traditional ... Læs mere

    324,36 kr.

  • Jensen Huang, The Godfather of the GPU

    An in- depth look at Career, Impact, Legacy, Biography and How He's Positioning Nvidia to Lead the Way in AI

    af Horace Trice ...
    Jensen Huang is the visionary CEO of Nvidia, a company that has revolutionized the way we live and work. His work has made GPUs ubiquitous in computing, and they are now used in a wide range of applications, from gaming to artificial intelligence.In this book, you will learn about Jensen Huang's incredible career, his early technology interest, his impact on the technology industry, and his legacy ... Læs mere

    55,00 kr.

  • Farm Accounts and Farm Management - With Information on Book Keeping, Records, Arithmetic and Mapping the Farm

    af Arthur D. Cromwell ...
    This volume contains a guide to running a successful and profitable farm, focusing on account keeping. The management of money is one of the most important factors of farming, and this volume aims to walk the reader through what must be done and avoided to ensure fiscal success. “Farm Accounts and Farm Management” will be of considerable utility to prospective and existing farmers alike, and it ... Læs mere

    56,25 kr. eller Gratis med Kobo Plus

  • The People and History of The Marine and Pocket Chronometer

    af Anon ...
    This antiquarian book contains a detailed account of the history of marine and pocket chronometer, with information on notable designers and manufactures, popularity, evolution, and much more. This fascinating and easy-to-digest treatise will appeal to those with a keen interest in the history and development of clocks and watches, and it would make for a worthy addition to collections of related ... Læs mere

    56,25 kr. eller Gratis med Kobo Plus

  • The Inner Workings of a Watch - A Simple Guide for Enthusiasts of Clockwork Mechanisms

    af Anon ...
    This antiquarian book contains an detailed and accessible guide to the inner working of watches, being a simple guide for enthusiasts of clockwork mechanisms. Written in clear, plain language and full of simple descriptions and comprehensive explanations, this text is ideal for anyone with an interest in the inner workings of clocks, and it would make for a great addition to any personal library. ... Læs mere

    56,25 kr. eller Gratis med Kobo Plus

  • Control of DC Motor Using Different Control Strategies

    af Dr. Hidaia Mahmood Alassouli ...
    The ultimate goal of this paper is to control the angular speed, in a model of a DC motor driving an inertial load has the angular speed, as the output and applied voltage, as the input, by varying the applied voltage using different control strategies for comparison purpose. The comparison is made between the proportional controller, integral controller, proportional and integral controller, ... Læs mere

    55,00 kr. eller Gratis med Kobo Plus

  • Cable-Driven Parallel Robots

    Proceedings of the 6th International Conference on Cable-Driven Parallel Robots

    Redigeret af Stéphane Caro, Andreas Pott, Tobias Bruckmann ...
    Serier serie Intelligent Technologies and Robotics (R0)
    This volume gathers the latest advances, innovations and applications in the field of cable robots, as presented by leading international researchers and engineers at the 6th International Conference on Cable-Driven Parallel Robots (CableCon), held in Nantes, France on June 25-28, 2023. It covers the theory and applications of cable-driven parallel robots, including their classification, ... Læs mere

    1.838,86 kr.

  • 15. Kolloquium Getriebetechnik

    13. - 15. September 2023

    Redigeret af Mathias Hüsing, Burkhard Corves ...
    Die Getriebetechnik ist eine Querschnittswissenschaft mit dem Ziel, Lösungen für die Übertragung von Bewegungen und Kräften in vielfältigen Teilgebieten des Ingenieurwesens zu entwickeln und in die Anwendung zu überführen. Die Beiträge behandeln die Auslegung ungleichförmig übersetzender Getriebe, Anwendungen im Maschinenbau und der Robotik sowie mechatronische Systeme in der Fahrzeug- ... Læs mere

    248,69 kr.

  • Cyclostationarity: Theory and Methods - II

    Contributions to the 7th Workshop on Cyclostationary Systems And Their Applications, Grodek, Poland, 2014

    Redigeret af Fakher Chaari, Jacek Leskow, Antonio Napolitano, Radoslaw Zimroz, Agnieszka Wylomanska, Anna Dudek ...
    Serier serie Springer Nature Proceedings excluding Computer Science
    This book reports on the latest advances in the analysis of non-stationary signals, with special emphasis on cyclostationary systems. It includes cutting-edge contributions presented at the 7th Workshop on “Cyclostationary Systems and Their Applications,” which was held in Gródek nad Dunajcem, Poland, in February 2014. The book covers both the theoretical properties of cyclostationary models and ... Læs mere

    1.176,49 kr.

  • Machining Dynamics

    Frequency Response to Improved Productivity

    af Tony L. Schmitz, K. Scott Smith ...
    Serier serie Engineering (R0)
    This book trains engineers and students in the practical application of machining dynamics, with a particular focus on milling. The book walks readers through the steps required to improve machining productivity through chatter avoidance and reduced surface location error, and covers in detail topics such as modal analysis (including experimental methods) to obtain the tool point frequency ... Læs mere

    1.008,49 kr.

  • Beyond the Assembly Line: Robotics and the Future of Manufacturing

    af Jonathan Pennisi ...
    Beyond the Assembly Line: Robotics and the Future of Manufacturing explores how robotics is revolutionizing the manufacturing landscape. In this comprehensive guide, readers will discover the transformative impact of automation on production processes, efficiency, and workforce dynamics. The book delves into the latest advancements in robotic technology, from collaborative robots (cobots) to AI ... Læs mere

    18,96 kr.

  • Recent Advances in Intelligent Manufacturing

    Select Proceedings of ICAME 2022

    Redigeret af Harish Kumar, Prashant K. Jain, Saurav Goel ...
    Serier serie Springer Nature Proceedings excluding Computer Science
    The book presents the select proceedings of the International Conference on Advancement in Manufacturing Engineering (ICAME) 2022 held at National Institute of Technology Delhi, India, during September 2–3, 2022. It discusses the latest research in the area of industrial and production engineering. Various topics covered in this book are precision engineering, additive manufacturing, computer ... Læs mere

    2.260,74 kr.

  • Cyclostationarity: Theory and Methods

    Redigeret af Fakher Chaari, Antonio Napolitano, Andrea Sanchez-Ramirez, Jacek Leśkow ...
    Serier serie Engineering (R0)
    In the last decade the research in signal analysis was dominated by models that encompass nonstationarity as an important feature. This book presents the results of a workshop held in Grodek—Poland in February 2013 which was dedicated to the investigation of cyclostationary signals. Its main objective is to highlight the strong interactions between theory and applications of cyclostationary ... Læs mere

    420,11 kr.

  • 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering

    Redigeret af Mokhtar Awang ...
    Serier serie Springer Nature Proceedings excluding Computer Science
    This volume presents selected papers from the 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE 2016) which was held from 23rd to 24th November, 2016 in Kuala Lumpur, Malaysia. The proceedings discuss genuine problems of joining technologies that are heart of manufacturing sectors. It discusses the findings of experimental and numerical works from ... Læs mere

    756,36 kr.

  • Advances in Industrial Machines and Mechanisms

    Select Proceedings of IPROMM 2020

    Redigeret af Y. V. D. Rao, C. Amarnath, Srinivasa Prakash Regalla, Arshad Javed, Kundan Kumar Singh ...
    Serier serie Springer Nature Proceedings excluding Computer Science
    This book presents the select proceedings of the 1st International 13th National Conference on Industrial Problems on Machines and Mechanism (IPRoMM 2020) and examines issues in the design, manufacture, and performance of mechanical and mechatronic elements and systems that are employed in modern machines and devices. The topics covered include robotics, industrial CAD/CAM systems, mechatronics, ... Læs mere

    2.260,74 kr.

  • Recent Advances in Machines and Mechanisms

    Select Proceedings of the iNaCoMM 2021

    Redigeret af Vijay Kumar Gupta, C. Amarnath, Puneet Tandon, M. Zahid Ansari ...
    Serier serie Springer Nature Proceedings excluding Computer Science
    This book presents the proceedings of 5th International and 20th National Conference on Machines and Mechanisms (iNaCoMM 2021) held at PDPM IIITDM Jabalpur during 9-11 December 2021. The conference was held in collaboration with the Association of Machines and Mechanisms (AMM) India and International Federation for the Promotion of Mechanism and Machine sciences (IFToMM). Various topics covered in ... Læs mere

    1.176,49 kr.

  • Abrasive Water Jet Machining of Engineering Materials

    af Jagadish, Kapil Gupta ...
    Serier serie Engineering (R0)
    This book presents insights in green techniques used in conventional and advanced machining. It consists of various experimental case studies conducted by the authors on green machining of difficult-to-machine materials, polymer and ceramic materials. Effects of green techniques / processes on machining properties like material removal rate, surface quality, geometric accuracy, productivity, and ... Læs mere

    466,79 kr.